46 chapter 1 selecting and playing sounds, Press the footage type button (indicator lights), Press the upper footage button (indicator lights) – Roland AT90S User Manual
Page 48: Press the [fast decay] button (indicator lit)
46
Chapter 1 Selecting and Playing Sounds
1.
Press the Footage Type button (indicator lights).
Each time you press the button, the indicator will alternate between ON (lit)
and OFF.
There are a total of three types of Footage voices.
2.
Press the Upper Footage button (indicator lights).
Each time you press the button, the indicator will alternate between ON (lit)
and OFF.
Try combining various pitches and play the Upper keyboard.
Various pitches can be combined for the Lower keyboard in the same way
as for the Upper keyboard.
Footage tablets and pitch correspond as follows.
fig.01-23
3.
Press the Percussion [4’] button or [2 2/3’] button (indicator
lit).
Play the Upper keyboard and notice that an attack has been added.
4.
Press the [Fast Decay] button (indicator lit).
The percussive sound will decay more quickly.
3
2
´
´
16´
8´
5
2´
2
4´
3
1
3
1
5
3
1 ´
´
1´
1
root
5th
8th
12th 15th 17th 19th 22th
one octave
below
8'=
NOTE
Percussion [4’] and [2 2/3’]
buttons cannot be used
simultaneously.
NOTE
The Percussion effect is
only available when a voice
is selected in the Upper
Organ Type section.
Min
Max
Min
Max
Min
Max
Min
Max