ROTEL CD Multi-Disc Changer RCC-1055 - Manual (Page 2)

2 RCC-1055 CD Multi-Disc Changer
Rotel products are designed to comply
with international directives on the
Restriction of Hazardous Substances
(RoHS) in electrical and electronic
equipment and the disposal of Waste
Electrical and Electronic Equipment
(WEEE). The crossed wheelie bin
symbol indicates compliance and that
the products must be appropriately
recycled or processed in accordance
with these directives.
Important Safety
Information
WARNING: There are no user service-
able parts inside. Refer all servicing to
qualified service personnel.
WARNING: To reduce the risk of fire or
electric shock, do not expose the unit
to moisture or water. Do not allow for-
eign objects to get into the enclosure.
If the unit is exposed to moisture, or a
foreign object gets into the enclosure,
immediately disconnect the power cord
from the wall. Take the unit to a quali-
fied service person for inspection and
necessary repairs.
Read all the instructions before connecting or
operating the component. Keep this manual so
you can refer to these safety instructions.
Heed all warnings and safety information in these
instructions and on the product itself. Follow all
operating instructions.
Clean the enclosure only with a dry cloth or a
vacuum cleaner.
You must allow 10 cm or 4 inches of
unobstructed clearance around the
unit. Do not place the unit on a bed, sofa, rug,
or similar surface that could block the ventilation
slots. If the component is placed in a bookcase or
cabinet, there must be ventilation of the cabinet
to allow proper cooling.
Keep the component away from radiators, heat
registers, stoves, or any other appliance that
produces heat.
The unit must be connected to a power supply
only of the type and voltage specified on the rear
panel of the unit.
Connect the component to the power outlet only
with the supplied power supply cable or an exact
equivalent. Do not modify the supplied cable in
any way. Do not attempt to defeat grounding
and/or polarization provisions. Do not use
extension cords.
Do not route the power cord where it will be
crushed, pinched, bent at severe angles, exposed
to heat, or damaged in any way. Pay particular
attention to the power cord at the plug and where
it exits the back of the unit.
Main plug is used as the mains disconnect device
and shall remain ready accessible.
The power cord should be unplugged from the
wall outlet if the unit is to be left unused for a
long period of time.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. DANGER: Visible laser radiation when open
and interlock failed or bypassed. Avoid direct
exposure to beam.
3. CAUTION: Do not open the top cover. There are
no user serviceable parts inside the player; leave
all servicing to qualified service personnel.
WARNING!
To reduce the risk of electrical shock, fires, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose the unit to rain or mois-
ture.
3. Do not touch the power cord or plug with
wet hands.
Immediately stop using the com-
ponent and have it inspected
and/or serviced by a qualified
service agency if:
• The power supply cord or plug
has been damaged.
• Objects have fallen or liquid has been spilled
into the unit.
• The unit has been exposed to rain.
• The unit shows signs of improper operation
• The unit has been dropped or damaged in any
way
Place the unit on a fixed, level surface strong
enough to support its weight. Do not place it on
a moveable cart that could tip over.
Notice
The COMPUTER I/O connection should be
handled by authorized person only.
FCC Information
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses
and can radiate radio frequency energy and,
if not installed and used in accordance with the
instruction, may cause harmful interference to
radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be deter-
mined by turning the equipment off and on, the
user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.(TV,
radio, etc.)
• Increase the separation between the equipment
and receiver
• Connect the equipment to an outlet on circuit
different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for additional help.
Caution
This device complies with part 15 of the FCC Rules
operation is subject to the following to conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est con-
forme à la norme NMB-003 du Canada.
This symbol means that this unit
is double insulated. An earth
connection is not required.
������������������������������
����
�������
�����
����
���� �����