RAD Data comm ASM-60 - Manual (Page 29)

ASM-60 Installation and Operation Manual Chapter 4 Management from a Terminal
Resetting ASM-60 4-7
4.6 Resetting ASM-60
You can perform reset of the main components of ASM-60, or reset the modem to
its factory settings.
➤ To reset ASM-60:
1. From the Main menu, type 4.
The Reset menu appears (Figure 4-7).
2. From the Reset menu, choose one of the following:
1 – To reset ASM-60 to the default data rate – 10.240 kbps.
2 – To reset the ASM-60 CPU (if the Watchdog jumper on the V-Agent
board is set to ON).
3 – To reset the DSP1 and DSP2.
4 – To reset the framer.
Reset
1. Factory Settings
2. Reset Device
3. Log Reset Chipset
4. Reset FPGA
>
ESC - previous menu ; ! - main menu ; & - exit terminal
-------------------------------------------------------
Figure 4-7. Reset Menu