RAD Data comm ASM-60 - Manual (Page 46)

Appendix C IR-IP Interface Module ASM-60 Installation and Operation Manual
C-2 Physical Description
Application
Figure C-1 shows a typical application of the ASM-60 modem equipped with the
IR-IP interface module.
ASM-60
with IR-IP
ASM-60
with HSSI Interface
Router
Figure C-1. Typical Application of ASM-60 with IR-IP
C.2 Technical Specifications
Router LAN IP Net Up to 256 hosts on LAN IP net
Filtering and
Forwarding
30 kbps/35 kbps
Buffer 256 frames (maximum size – 1534 bytes)
Delay 1 frame
LAN Standard Conforms to IEEE 802.3/Ethernet v2
Data Rate 10 Mbps (20 Mbps 10BaseT in full duplex
topology)
Connector 10BaseT (UTP): Shielded RJ-45
WAN Protocols • PPP (PAP/CHAP)
• Frame Relay (RFC 1490)
• HDLC
C.3 Physical Description
Figure C-2 shows the rear panel of ASM-60 with the IR-IP interface module.
: FOR CONTINUED
TYPE AND RATING OF FUSE.
FIRE, REPLACE ONLY WITH SAME
PROTECTION AGAINST RISK OF
CAUTION
10BASE-T
IR-IP
INT
ACT
ERR
A-1 2 4 5-B
LINE
Figure C-2. Rear Panel of ASM-60 with the IR-IP Module