Security host/guest, User name to send, Password to send – RAD Data comm ASM-60 User Manual

Page 62: User name to accept, Password to accept

Advertising
background image

Appendix C IR-IP Interface Module

ASM-60 Installation and Operation Manual

C-18

Advanced Setup Menu

Security Host/Guest

This option can be used to configure the IP router either as a guest unit, to be
authenticated by another router, or as a host unit, that authenticates other routers.

User Name To Send

The name by which an IP router card configured as guest identifies itself.

Password To Send

The password by which an IP router card configured as guest identifies itself.

User Name To Accept

The user name to be accepted by an IP router configured as host, when an

incoming connection request is received.

Password To Accept

The user password to be accepted by an IP router configured as host, when an

incoming connection request is received.
A typical PPP Protocol Parameters menu is shown in Figure C-13.

IR_IP

<IR-IP>

S/W Ver. 1.00 31/IR (date)


Quick Setup

Management Access

Advanced Setup
.....................................................................

Device

identification

Interface

Parameters

Protocol

Parameters

=====================================================================

1. Header and Control Field Compression

:[ No ]

2. Protocol Field Compression:

:[ No ]

3. Authentication Protocol

:[ NONE/NONE ]

4. Security Host / Guest

:[ Guest ]

5. User Name To Send

:.................

6. Password To Send

:.................

7. User Name To Accept :.................

8. Password To Accept

:.................


Press one of the numbers to select or ESC:

Figure C-13. PPP Protocol Parameters Menu

Advertising