ResMed Flow Generator VPAP Adapt SV - Manual (Page 17)

17 Using the VPAP Adapt SV
English
Control Panel Functions
The control panel of the VPAP Adapt SV has a keypad that allows you to:
• start or stop treatment
• adjust settings on the flow generator
• mute or stop alarms
• view treatment data.
Figure 13: The VPAP Adapt SV control panel
LCD screen
Displays information about flow generator settings, alarms and treatment. The
LCD screen is backlit whenever any key is pressed. The lighting will turn off
automatically when no button has been pressed for two minutes, or can be set
to stay on (see “Options Menu” on page 23).
An alarm message will overwrite any other message on the screen. The original
screen will reappear when any key is pressed.
Start/Stop key
• Press the key once to start or stop treatment.
Up/Down key
• Moves backwards and forwards within a menu and between menus.
• Increases and decreases values of parameters—press once to adjust in
single increments; hold down to move quickly through the values.
LCD display
Alarm LEDs
Alarm mute key
Left Up/Down Start/Stop
QuickView key
key key key
Right
key
228234 VPAP Adapt SV User Guide USA Eng.book Page 17 Monday, October 13, 2008 2:15 PM