Roberts Gorden Tubular Unit Heaters 300 - Manual (Page 41)

SECTION 14: R EPLACEMENT P ARTS
35
14.6 Flue Blower
IT IS IMPORTANT THAT ONLY THE CORRECT FLUE BLOWER SPECIFIED FOR EACH MODEL TYPE
IS USED WHEN REPLACING THESE ITEMS.
Carry out a start-up after working on or changing an flue blower. See Page 22, Section 11.
MODEL
UHA[S]
150 - 175
UHA[S]
200 - 300
UHA[S]
350 - 400
Flue Blower P/N 90710405 90710403 90710402
Vent Box
Outlet
Gasket
Flue Blower
Vent Box
screws
Flue
Adapter
Flue Adapter
to Flue Blower
screws
Rear Panel
Hole
Disconnect
electrical connections
at plug in tabs.
Mounting Plate
to Vent Box
screws
Mounting
Plate
Gasket
Air Plate
Mounting Plate
to Flue Blower
screws
Vent Box
Gasket
Remove screws securing outlet
flange to the flue adapter.
Refit in reverse order.
Remove screws securing flue
blower mounting plate to vent
box.
Remove screws securing
mounting plate to blower.
Refit in reverse.
Use new gaskets.
Ensure sealed joints.
Ensure mounting plate orifice is
clear and not obstructed.