Ricoh R8 - Manual (Page 102)

100
V
a
rio
u
s
S
hoo
ting
Fu
nc
tion
s
1
You can prevent camera shake by turning on the camera shake
correction function.
At the time of purchase, the camera shake correction function is
turned on.
1
Display the Shooting menu.
• For information on using the menu, see P.70.
2
Press the ADJ./OK button " to select [Camera Shake
Cor] and press the button $.
3
Press the button !" to select
[On].
4
Press the ADJ./OK button.
• The symbol appears on the screen.
Caution------------------------------------------------------------------------------------------
• The camera shake correction function is not available during Multi-shot shooting, long
time exposure and movie shooting. If Multi-shot shooting or long time exposure is set
while the camera shake correction function is turned on, E changes to F. E
disappears when the mode dial is set to 3.
• The camera shake correction function cannot prevent movement of the shooting
subject (caused by wind, etc.).
• Effects of the camera shake correction function vary depending on the surroundings.
Note ----------------------------------------------------------------------------------------------
The J symbol appears when camera shake is likely to occur. (GP.33)
Using the Camera Shake Correction
Function to Prevent Camera Shake
(Camera Shake Cor)