Ricoh R8 - Manual (Page 53)

If
yo
u
are u
s
in
g
th
e
ca
mera
fo
r th
e
fi
rst ti
me
, r
e
ad
th
is
secti
o
n
.
51
Checking the image in shooting mode----------------------------------------------------
In shooting mode, immediately after you take a still image, the still image is displayed
on the screen for a moment so you can check it. You can change the image display
time using [LCD Confirm.] on the setup menu (GP.154).
When [LCD Confirm.] is set to [Hold], the image remains displayed until the next time
you half-press the shutter release button. When [LCD Confirm.] is set to [Hold], the
displayed image can also be enlarged or deleted. (GP.53, 55)
Turning on the camera in playback mode------------------------------------------------
When the camera is off, pressing the 6 (Playback) button for more than one second
turns the camera on. (The camera starts up in playback mode.)
When the camera has been turned on with the 6 button, pressing the 6 button
again switches playback mode to shooting mode.
Where images are played back from-------------------------------------------------------
When no SD memory card is loaded, the camera plays back from the internal memory.
When an SD memory card is loaded, it plays back from the SD memory card.
2008 01 01 / /
10 /50
1280 1280
100-0011 100-0011
2008 01 01 / /
20 /50
1280 1280
100-0021 100-0021
2008 01 01 / /
19 /50
1280 1280
100-0020 100-0020
2008 01 01 / /
30 /50
1280 1280
100-0031 100-0031
2008 01 01 / /
21 /50
1280 1280
100-0023 100-0023
10 frames backward
10 frames forward
1 frame backward 1 frame forward