Ricoh R8 - Manual (Page 120)

118
O
th
e
r P
lay
b
ack
F
u
n
c
ti
o
n
s
3
• Example 2) To correct an overexposed or
underexposed image:
If the image in overexposed, move the left
point to the right so that it is aligned with
the left end of the histogram peaks.
If the image in underexposed, move the
right point to the left so that it is aligned with
the right end of the histogram peaks.
You can then adjust the overall image
brightness by moving the middle point left
or right.
• Example 3) To boost the contrast in an
image:
If an image is lacking in contrast, the
histogram peaks are concentrated toward
to the center. By aligning the left and right
points with the respective ends of the
histogram peaks, you can create an image
with clearly defined bright and dark areas.
You can then adjust the overall image
brightness by moving the middle point left
or right.
8
Press the ADJ./OK button.
• Messages appear during the correction process, and then the
corrected image is recorded. The original image remains unchanged.
Caution------------------------------------------------------------------------------------------
• You can only use level compensation for still images shot using this camera.
• You cannot use level compensation for images shot in Movie, S-Cont or M-Cont
mode.
• Level compensation may not be available for images shot using the [Text Mode],
[Black&White] or [Sepia] in scene mode.
• You cannot use level compensation for subfiles with [Sub File Size] set to lower than
[N640[VGA]], when shooting a still image with a subfile with [Record Dual Size] set to
[On]. (GP.101, 150)
• While you can use level compensation repeatedly, the image is recompressed each
time and there will be some decline in image quality.
Overexposed image