Ricoh R8 - Manual (Page 147)

145
C
h
a
n
gi
ng C
a
m
e
ra
Se
tti
n
g
s
5
To adjust the brightness of the picture display, follow the steps
below.
1
Display the Setup menu.
• For the operating procedure, see P.141.
2
Press the ADJ./OK button " to
select [LCD Brightness] and
press the button $.
• The screen for setting the brightness
appears.
3
Press the button !" to adjust
the brightness.
• Move the slider on the LCD brightness
adjustment bar down to make the
picture display darker and up to make
it brighter. The brightness of the
picture display changes as the slider is
moved along the bar.
• To cancel brightness adjustment,
press the DISP. button to cancel the setting and return to the Shooting
menu.
4
When you reach the desired brightness, press the ADJ./
OK button.
• The display returns to the Setup menu.
5
Press the MENU button or the ADJ./OK button.
Using the DISP. button to adjust the brightness ---------------------------------
When shooting, press and hold down the DISP. button to maximize the LCD brightness.
When the brightness is at the maximum setting, holding the DISP. button down returns
the brightness to the level set in [LCD Brightness].
Note ----------------------------------------------------------------------------------------------
When the picture display is on and is left for a few seconds, it will turn off to conserve
battery power. Operate the camera to turn on again.
Adjusting the Brightness of the
Picture Display (LCD Brightness)
Ok Cancel