Ricoh R8 - Manual (Page 66)

64
V
a
rio
u
s
S
hoo
ting
Fu
nc
tion
s
1
1 Various Shooting Functions
You can assign four functions from the Shooting menu to the ADJ./
OK button. The fifth function (AE/AF target shift GP.66) is fixed
and cannot be changed.
By assigning functions to the ADJ./OK button, you can make settings
with fewer button operations and without displaying the Shooting
menu. This is convenient for using frequently used functions.
At the time of purchase, three of the Shooting menu functions are
assigned. You can use the Setup menu to add or change the
assigned functions. Refer to P.157 for adding or changing the
assigned functions.
Use the following procedure to use the ADJ. mode.
1
In shooting mode, press the ADJ./OK button. Or, press
the ADJ./OK button !".
• The ADJ. mode screen appears. If you pressed the ADJ./OK button
!" in step 1, the screen appears with the first setting changed.
• The fifth icon (AE/AF target shift) is fixed and cannot be changed in the
Setup menu.
2
Press the ADJ./OK button #$ to select the desired item.
• The screenshots below are examples of the screen display when
[Expo. Comp.], [Wht. Bal.], [ISO], and [Quality] are assigned to [ADJ
Btn. Set.1] to [ADJ Btn. Set.4] with the Setup menu.
Instructions in this manual to “Press the ADJ./OK button !"#$”
indicate that you should press the ADJ./OK button in the up, down,
left or right direction. Instructions to “Press the ADJ./OK button”
indicate that you should press directly down on the button.
Using the ADJ. Mode
Off
AE
AF
AE/AF
ADJ Btn. Set.3 ADJ Btn. Set.4
ADJ Btn. Set.1 ADJ Btn. Set.2
(AE/AF target shift)