Ricoh R8 - Manual (Page 107)

105
S
hoot
ing/
P
laying
Back M
o
vi
es
2
Note ----------------------------------------------------------------------------------------------
• The flash cannot be used.
• While shooting movies, only digital zoom can be used. (GP.38)
• When the shutter release button is pressed in Step 2, the camera focuses on the
subject.
• The remaining recording time may not change uniformly because it is recalculated
from the remaining memory capacity during movie recording.
• Use the Shooting menu to set the image size (GP.72) and frame rate (GP.105)
of movies.
• The Shooting menu items for movie mode differ from those in Still Image Mode.
(GP.70)
• Depending on the remaining battery level, the battery may become depleted during
interval shooting. Use of a fully charged battery is recommended when shooting for
long periods.
• Use of a high speed memory card or a SD memory card with sufficient memory is
recommended when shooting for long periods.
You can select the number of shot frames per second (frame rate)
in movie mode.
1
Turn the mode dial to 3.
2
Press the MENU button.
• The Shooting menu is displayed.
3
Press the ADJ./OK button " to select [Frame Rate] and
press the button $.
4
Press the button !" to select
[30Frame/S] or [15Frame/S].
5
Press the ADJ./OK button.
• The setting appears on the screen.
Movie Frames---------------------------------------------------------------------------------
Movies consist of many frames whose images appear to be moving when displayed at
high speed.
Setting the Frame Rate (Frame Rate)