Ricoh R8 - Manual (Page 156)

154
C
h
a
n
gi
ng C
a
m
e
ra
Se
tti
n
g
s
5
Immediately after you press the shutter release button, the still
image taken is displayed on the screen for a moment so you can
check it. By default, the image confirmation time is set to 0.5
second, but this can be changed.
To change the image confirmation time, follow the steps below.
1
Display the Setup menu.
• For the operating procedure, see P.141.
2
Press the ADJ./OK button " to select [LCD Confirm.]
and press the button $.
3
Press the button !" to select
the desired setting.
4
Press the ADJ./OK button.
Note ----------------------------------------------------------------------------------------------
When [LCD Confirm.] is set to [Hold], the displayed image can also be enlarged
(GP.53) or deleted (GP.55).
Changing Image Confirmation Time
(LCD Confirm.)
Available Settings
Off (Image not displayed for confirmation)
0.5Sec. *Default setting
1 Sec.
2 Sec.
3 Sec.
Hold (The image remains displayed until the next time you half-press the shutter release
button.)