Ricoh R8 - Manual (Page 159)

157
C
h
a
n
gi
ng C
a
m
e
ra
Se
tti
n
g
s
5
When functions are assigned to the ADJ./OK button, you can
display various shooting setting screens with fewer button
operations and without displaying the Shooting menu.
You can use [ADJ Btn. Set.1] to [ADJ Btn. Set.4] to assign camera
functions that can be activated by pressing the ADJ./OK button.
For information on how to use the ADJ. mode, see P.64.
To assign a function to [ADJ Btn. Set.1] to [ADJ Btn. Set.4], follow
the steps below.
1
Display the Setup menu.
• For the operating procedure, see P.141.
2
Press the ADJ./OK button " to select [ADJ Btn. Set.1],
[ADJ Btn. Set.2], [ADJ Btn. Set.3], or [ADJ Btn. Set.4],
and then press the button $.
3
Press the button !" to select
the desired setting.
4
Press the ADJ./OK button.
Assigning Functions to the ADJ./OK
Button (ADJ Btn. Set.)
Available Settings Refer to
Off *Default setting for [ADJ Btn. Set.4] -
Expo. Cmp *Default setting for [ADJ Btn. Set.1] P.92
Wht. Bal. *Default setting for [ADJ Btn. Set.2] P.94
ISO *Default setting for [ADJ Btn. Set.3] P.97
Quality (Pic Quality/Size) P.72
Focus P.74
Sharp P.78
Expo. Met. P.77
Cont Mode P.79
Auto BKT P.84