Rowe CD-100K - Manual (Page 103)

CD-100K Phonograph
2-78 21822666
LOCKOUT AND TIMED LOCKOUT MODES
To lockout a disc, enter the two-digit disc number followed by two zeros. To lockout a selection, enter the four-
digit selection number.
If you are at Security Level 3 and have one of the four programming options on the display, you will notice the 1’s
digit of the sequence number will be blinking. The blinking digit indicates it may be changed. Type the sequence
number where the new selection is to be entered then push POPULAR. If the sequence number entered would create
a hole, the display will change to show the next available sequence number. The 1’s digit in the selection number
will now blink. Type in a four-digit selection number (two-digit disc number for Autoplay only), then press
POPULAR to save it. The 1’s digit in the sequence number will now blink, allowing another sequence number to
be entered.
If you try to enter a selection from a disk that has limits of 0 (the disk is not installed in the machine or it has not yet
been initialized), the four dashes will reappear when POPULAR is pushed.
By holding RESET and pushing 3, the next sequence number and selection will be displayed. Holding RESET and
pushing 2 will display the previous sequence number.
EDITING AUTOPLAY, PREMIUMS, PRIORITIES AND LOCKOUTS
To change a selection number, use RESET + 2 and RESET + 3 to scan the sequence looking for the selection to
be changed. If the sequence number of the selection to be changed is known, simply type the sequence number.
When the proper selection is displayed, push POPULAR to move the blinking digit to the 1’s position of the selection
number. Type in the new four-digit selection number (a two-digit disc number for Autoplay only) then push
POPULAR. If you try to enter a selection from a disk that has limits of 0 (the disk is not installed or not yet initialized),
the original selection will be automatically reinserted when POPULAR is pushed.
To delete a selection number, locate that selection as described above. Push and hold RESET, then push 4 once.
The selection will be deleted. The next selection will be moved down into this sequence number to fill the hole the
deletion would have left.
To add a selection in the middle of a list, locate the selection previous to selection you want to enter. Hold RESET
and push 5 once. This will open a hole in the list. Type the new selection number then push POPULAR. If you try
to enter a selection from a disk that has limits of 0 (the disk is not installed in the machine or it has not yet been
initialized), selection 0001 will be inserted automatically.
TIMED FREE PLAY AND TIMED LOCKOUT SCHEDULING TUTORIAL
What Multiple Lockout On/Off Times Do
Multiple lockout On/Off times allow you to lockout (prevent selecting or playing) specific selections or discs up to
three times a day each day of the week. Selections or discs to be locked-out are entered in OPTION 6990
(TIMLOCK). Scheduling and entering the times is done in the same manner as MULTIPLE FREEPLAY ON/OFF
times (refer to the Timed Free Play example).
What Multiple Freeplay On/Off Times Do
Multiple Freeplay ON/OFF Times allow you to stimulate interest in the phonograph by offering free plays at up to
three times a day each day of the week. Note that this feature only schedules the Freeplay times. To allow Freeplay,
you must be sure to turn the TIMED FPLAY (COMMAND 54) ON before Freeplay will be enabled.