Rowe CD-100K - Manual (Page 88)

Section 2: Installation & Programming
21822666 2 - 6 3
Table 2-5A. Menu & Command Descriptions
Continued
Code Description
904 Mic 1 Routing - Sets MIC 1 to route to any or all of the 6 different PREAMP output channels (left to
right: AUX R, AUX L, CH1, CH2, CH3, CH4). If 0 on the display for the channel, the MIC will not route
to that channel. If 1, then the MIC routes to the channel. Push and hold RESET, then press either 2 or 3
to step thru the channels.
905 Mic 2 Routing - Sets MIC 2 to route to any or all of the 6 different PREAMP output channels (left to
right: AUX R, AUX L, CH1, CH2, CH3, CH4). The channel currently selected will blink. Hold RESET
and press 9 to select 0 (do not route) or 1 (route). Then push POPULAR.
906 Mic 3 Routing - Sets MIC 3 to route to any or all of the 6 different PREAMP output channels (left to
right: AUX R, AUX L, CH1, CH2, CH3, CH4). The channel currently selected will blink. Hold RESET
and press 9 to select 0 (do not route) or 1 (route). Then push POPULAR.
907 Mic Type - Sets the type of MIC to either karaoke or paging. The same MIC can be used for either type.
The amp uses this to be able to control the volume of the main (music/BGM) source for each type. Also,
the leftmost bit (bit 5) is the configuration bit. 0 = CD100K and 1 = Download. Bit 2, 1 , 0 is MIC 3, 2,
1 respectively. 0 = karaoke and 1 = page. Hold RESET and push 2 or 3 to select MIC. Hold RESET
and push 9 to select MIC type, and push POPULAR
908 BGM VOLUME MAX - Sets the maximum volume level that BGM volume may be set to. The range is
0-63. Type in volume and push POPULAR.
909 MORE AMP 1 - This menu is a continuation of the AMPLIFIER menu
9090 CD Input Preset Volume Level - Sets the CD input level from 0-50. Type in new level and push
POPULAR.
9091 Stereo A Input Preset Volume Level - Sets the stereo a input level from 0-50. Type in new level
and push POPULAR.
9092 Stereo B Input Preset Volume Level - Sets the stereo b input level from 0-50. Type in new level
and push POPULAR.
9093 Mono Input Preset Volume Level - Sets the mono input level from 0-50. Type in new level and push
POPULAR.
9094 Channel 1&2 Output Preset Volume Level - Sets the CH 1&2 output level from 0-50. Type in
new level and push POPULAR.
9095 Channel 3&4 Output Preset Volume Level - Sets the CH 3&4 output level from 0-50. Type in
new level and push POPULAR.