Rowe CD-100K User Manual

Page 84

Advertising

Section 2: Installation & Programming

21822666

2 - 5 9

Table 2-5A. Menu & Command Descriptions

Continued

Code

Description

6992 Free Album - Allows entire albums to be selected if FREE PLAY (55) and ALBUM BUY (65) are ON.

Hold RESET and press 9 to toggle this command ON and OFF. Press POPULAR to save your choice.

6993 Thank You On/Off - If set to ON, the “Thank You” message is briefly displayed when a customer

completes his final selection (the credit goes to zero). Hold RESET and press 9 to toggle this command ON
and OFF. Press POPULAR to save your choice.

6994 Popular Key ON/OFF - If set to ON, most POPULAR selections are allowed using the POPULAR

key. If set to off, most popular selections are not allowed. Hold RESET and press 9 to toggle ON and OFF.

6995 Premium Ratio - Displays and sets the number of credits needed to make a premium selection (see

CODE 62).

6996 Autolod Dflt - Displays and toggles the autoload default option. Factory default settings will load

automatically if a RAM checksum error occurs and this option is ON. Set this option to OFF if you do not
want factory settings loaded automatically.

6997 RAM Test Code - Displays status of the RAM. 0 indicates that the RAM test passed, 1 indicates a disc

limit error, 2 indicates a PREMIUM, LOCKOUT, or PRIORITY LIST error, and 3 indicates a pricing or
other error.

6998 Sel xxxx hh:mm - Displays and sets time of day for a specific selection to play. Type in selection number,

then press POPULAR. To remove selection, hold RESET and push 9. Type in the hour, and press
POPULAR. Type in the minutes, and press POPULAR.

6999 Pairs Sel —— - Displays and sets paired selections (10 maximum). Paired selections are a short teaser

and the following selection, or a selection and the following short trailer. If either of the pair is selected, the
other is selected automatically for free. When programming, enter first selection of pair (i.e., teaser, if teaser
and selection; or selection, if selection and trailer). See Programming Autoplay, Premiums, Priorities,
Lockouts, and Pairs.

7 REPORTS - The REPORTS menu provides an output to an RS-232 serial printer or computer with an

RS-232 serial interface. To use this feature, the RS-232 Option must be installed in the phonograph. To
select and print the report, type the code for the report and press POPULAR. The display will blink when
the command is executed.