Rowe CD-100K - Manual (Page 68)

Section 2: Installation & Programming
21822666 2 - 4 3
Table 2-5A. Menu & Command Descriptions
Code Description
* SERVICE MODE * - Is the title of the MAIN menu. This menu is the beginning menu for all the other menus.
All of the options in this menu are names for other menus. The table that follows contains descriptions of all of the
menu options. Enter two-, three-, four-, five-, or six-digit commands from the * SERVICE MODE * display.
0 SECURITY - Contains options to access and change the security levels and to change the phonograph I.D.
All security code changes must be made from Security Level 3.
00 Enter Code - Allows you to enter a security code. If the security code that you enter matches either the
Level 2 or Level 3 Security Code, the phonograph will go to that security level after you press POPULAR.
If both Security Level 2 and Level 3 have the same code (the factory-set code for both levels is 0000), then
Level 3 is allowed. When the new security level is attained, the phonograph will automatically go to
COMMAND 01 and display the new security level.
01 Security Level - Displays the current security level. This command can be used at any time to determine
the security level. The phonograph automatically moves to this option and displays the new security level
after you successfully enter a security code (see COMMAND 00).
02 Level 2 Security Code - Displays the Level 2 Security Code and allows the security code to be changed
by entering new data, then pressing POPULAR. The phonograph must be in Security Level 3 for either of
these selections to function. Write the new security code down and keep it in a safe, but accessible place.
No one will be able to access Level 2 if the SECURITY OPTION 06 is turned ON and you loose the security
code. This security level is intended to be used by the route man, so that he can read cash totals, reset cash
totals, and initialize the phonograph. The Route man cannot change pricing or programming.
03 Level 3 Security Code - Displays the Level 3 Security Code and allows the security code to be changed
by entering new data, then pressing POPULAR. The phonograph must be in Security Level 3 before this
code can be displayed or changed. Write the new security code down and keep it in a safe, but accessible
place. No one will be able to access Level 3 or change the security code if SECURITY OPTION 06 is
turned ON and you loose the security code.
04 Phonograph I.D. - Displays the current phonograph I.D. code and allows the I.D. to be changed by
entering new data, then pressing POPULAR. The phonograph must be in Security Level 3 before the I.D.
can be changed. It may be viewed in Security Level 1.
05 Void Service Switch - Allows the top door of the phonograph to be closed (which normally places the
SERVICE switch back into the NORMAL mode) and still remain in the SERVICE mode. Press and hold
RESET. Press 9 to toggle the option ON and OFF. Press POPULAR to save the change. This option
must be OFF to resume normal operation.