Rowe CD-100K - Manual (Page 113)

CD-100K Phonograph
2-88 21822666
Setting the Master ON/OFF Date: Push 1 (see Note #1 on Page 2-56)
Messages 1-8 can play every day unless they are changed in the MASTER ON/OFF DATE menu. By scheduling
messages to play on specific dates, you may tailor messages (such as “HAPPY BIRTHDAY JOE”) to play on special
dates.
The display screen reads 1 ON 01 01 1997.
This means message “1” is set to begin playing on January 1, 1997.
A. Setting the ON time for a message.
1. The message number should be flashing. Type the message number that you desire to create an ON/OFF
date for and push POPULAR.
2. Enter the two-digit month the message is to play and push POPULAR.
3. Enter the two-digit day the message is to play and push POPULAR.
4. Enter the four-digit year the message is to play and push POPULAR.
B. Setting the OFF time for the message. Hold RESET and push 3, then release RESET.
1. The display now reads M* OFF 12 30 2050. Push POPULAR. (This menu turns the message OFF for
the selected date and beyond. M* should be the message number you created the ON date for.)
2. Enter the two-digit month the message is to stop playing and push POPULAR to save. Enter the two-
digit day the message is to stop playing and push POPULAR to save. Enter the four-digit year the message
is to stop playing and push POPULAR to save.
ENHANCED AUTOPLAY TUTORIAL
Autoplay
The Autoplay feature stimulates customer interest in the phonograph by periodically playing selections. The Autoplay
feature is factory preset to STD and plays one track after the phonograph has been idle for 20 minutes. This feature
may be programmed for any length of time between 0 and 255 minutes. Selections may be played in a specific
sequence.
Differences Between Standard and Enhanced Autoplay
Enhanced Autoplay lets you categorize the discs (for example: Popular, Country, Rock, etc.). Up to eight categories
can be assigned and selected up to 20 different times of the day, each day of the week. Standard Autoplay cannot
assign categories, has one ON/OFF time, and lets you select which days of the week Autoplay is active. Enhanced
Autoplay programming is more involved, so Standard Autoplay should be used unless categories, multiple ON/OFF
times, or different ON/OFF times for different days are needed.