Digital video connection, Rs-232 connection, Pre l iminar y – Runco PLASMAWALL XP-OPAL65DHD User Manual
Page 39
PlasmaWall XP Series Installation/Operation Manual
23
PRE
L
IMINAR
Y
Digital Video Connection: The PlasmaWall has a dual HDMI input board, labeled HDMI
(SLOT 2). Connect the HDMI output from the DHD Controller to input “A” on this board,
using an HDMI-to-HDMI cable.
RS-232 Connection: Connect the Display Control (RS-232) output from the DHD
Controller to the SERIAL input on the PlasmaWall. Use a standard, modular telephone
cable with RJ11 plugs at both ends. On the PlasmaWall end, use the provided
RJ11-to-DB9 adapter. This adapter is wired as shown in Figure 3-5.
Figure 3-5. RS-232 Connection from the DHD Controller to the PlasmaWall
3
4
2
RCV DATA
REQUEST TO SEND
SIG GND
2
3
8
7
5
XMT DATA
CLEAR TO SEND
NO CONNECTION
1, 5, 6
1, 4,
6, 9
To/From
DHD
Controller
PlasmaWall
DB-9 Female
1 5
6 9
SERIAL
6-position
RJ-11 Male
6
1
1
6