Runco PLASMAWALL XP-OPAL65DHD - Manual (Page 55)

Operation
PlasmaWall XP Series Installation/Operation Manual 39
PRE
L
IMINAR
Y
Cinema CINEMA Select Cinema to view 2.35:1
source material on a 16:9
screen. The upper and lower
portions of the screen are
masked, but the geometry of the
active image area is not
changed.
Virtual Cinema SVC A 2.35:1 image is stretched
anamorphically in both
directions to fill a 16:9 display
area.
The 2.35:1 image is cropped on
all sides.
Native (none) Select Native to display the
source signal in its native
resolution, centered in the
display area with no re-sizing or
overscan.
This means, for example, that
720p HDTV programs will
display with unused pixels on all
sides: 320 on the left and right
sides and 180 above and below.
With SDTV and EDTV sources,
the PlasmaWall scales the image
horizontally to achieve a 16:9
aspect ratio.
Table 4-1. Aspect Ratio Settings (continued)
Aspect Ratio
Remote
Control
Button
Description
2.35:1 Image on
16:9 Screen
2.35:1 Image on
16:9 Screen
2.35:1 Image on
16:9 Screen with
Virtual Cinema
1080i HDTV Image
720p HDTV Image