Runco PLASMAWALL XP-OPAL65DHD - Manual (Page 40)

Installation
24 PlasmaWall XP Series Installation/Operation Manual
PRE
L
IMINAR
Y
Connecting Source
Components to the DHD
Controller
Connect your video sources to the DHD Controller as shown and described in the
sections that follow.
HDMI Source Connections: See Figure 3-6.
Figure 3-6. HDMI Source Connections
➤
Use the HDMI inputs whenever possible. This ensures the highest
video quality because the signal is carried in the digital domain
throughout the entire signal path, from source component output
into the display.
You can also connect computers with DVI output to these inputs.
Refer to Supported Timings on page 76 for a list of compatible
input signals.
Tip
Note
HDMI
AV OUT
HDMI
AV OUT
HDMI sources (BD, DVD, DTV Set-Top Box etc.)