Specifications, 1 plasmawall specifications, Table 7-1 . plasmawall specifications – Runco PLASMAWALL XP-OPAL65DHD User Manual
Page 87: Plasmawall specifications, Pre l iminar y
PlasmaWall XP Series Installation/Operation Manual
71
PRE
L
IMINAR
Y
7.1
PlasmaWall
Specifications
Table 7-1 lists the PlasmaWall specifications.
7. Specifications
Table 7-1. PlasmaWall Specifications
Native Resolution:
1920 x 1080
Screen Size:
XP-50DHD and XP-OPAL50DHD:
43.50 in. W x 24.50 in. H (1104.9 x 622.3 mm)
50 in. (1270.0 mm) diagonal
XP-65DHD and XP-OPAL65DHD:
56.50 in. W x 31.80 in. H (1434.0 x 807.0 mm)
65 in. (1646.0 mm) diagonal
XP-103DHD:
89.30 in. W x 50.30 in. H (2268.2 x 1277.6 mm)
103 in. (2616.2 mm) diagonal
Screen Aspect Ratio:
16:9
Available Aspect Ratios:
Refer to Table 7-2
DTV Compatibility:
480p, 720p, 1080i, 1080p
Contrast Ratio:
400:1 (measured at 100 lux); 5,000:1 maximum
Data/Graphics Compatibility:
VGA, SVGA, XGA, SXGA, UXGA (compressed)
Horiz. scan frequency = 15 to 110 kHz
Vert. scan frequency = 48 to 120 Hz
Inputs (from DHD Controller):
(1) Digital Video (HDMI 1.2A with HDCP)
(1) RS-232 (9-pin, D-sub male)
Power Requirements:
XP-50DHD / XP-OPAL50DHD / XP-65DHD /
XP-OPAL65DHD: 100 to 240 VAC, 50/60Hz
XP-103DHD: 200 to 240 VAC, 50/60Hz
Power Consumption:
XP-50DHD / XP-OPAL50DHD: 650 W (1.0 W in standby),
maximum
XP-65DHD / XP-OPAL65DHD: 790 W (1.0 W in standby),
maximum
XP-103DHD: 1500 W (1.5 W in standby), maximum
Operating Environment:
40ºF to 95ºF (5ºC to 35ºC);
20% to 80% humidity (non-condensing)
Altitude – up to 9,000 feet (2,743m)
Dimensions:
XP-50DHD / XP-OPAL50DHD: See Figure 7-1
XP-65DHD / XP-OPAL65DHD: See Figure 7-2
XP-103DHD: See Figure 7-3
Weight
(panel only, without stand):
XP-50DHD / XP-OPAL50DHD: 93.0 lbs. (42.18 kg)
XP-65DHD / XP-OPAL65DHD: 163.1 lbs. (73.98 kg)
XP-103DHD: 485.0 lbs. (220.0 kg)
Regulatory Approvals:
Complies with FCC Part 15 Class B, ICES-003, UL6500
Ver.2
Specifications are subject to change without notice.