2 dhd controller specifications, Table 7-2 . dhd controller specifications, Dhd controller specifications – Runco PLASMAWALL XP-OPAL65DHD User Manual
Page 88: Table 7-2, Pre l iminar y
72
PlasmaWall XP Series Installation/Operation Manual
PRE
L
IMINAR
Y
7.2
DHD Controller
Specifications
Table 7-2 lists the DHD Controller specifications.
Table 7-2. DHD Controller Specifications
Aspect Ratios:
4:3, Letterbox, 16:9, VirtualWide, Cinema, Virtual Cinema,
Native
Video Standards:
NTSC, PAL, SECAM
Inputs:
(1) Composite
(2) S-Video
(1) Component/RGBHV/SCART (5 x RCA)
(2) Component/RGBHV (5 x BNC)
(2) HDMI 1.3 with HDCP
Outputs:
HDMI 1.3 with HDCP
Control Options:
-
Discrete infrared remote
-
Serial commands via RS-232
-
Front-panel controls
RS-232 Communication
Parameters:
19200 bps, no parity, 8 data bits, 1 stop bit, no flow control
Trigger Outputs:
(3) +12 VDC, each rated at 250 mA and thermal
fuse-protected
Bandwidth:
150 Mega Samples per Second (MSPS)
Power Requirements:
100 to 240 VAC (auto-sensing), 50/60 Hz, 160 Watts
Operating Environment:
41°F to 95°F (5°C to 35°C), 0% to 90% humidity
(non-condensing)
Dimensions:
Width = 17.50 inches (444.5 mm)
Depth = 11.19 inches (284.1 mm)
Height = 3.75 inches (95.3 mm)
Weight:
13.0 lbs. (5.90 kg)
Regulatory Approvals:
Complies with FCC, CE C-Tick
Limited Warranty:
Two (2) years parts and labor from the date of delivery to
the end user.
Specifications are subject to change without notice.