Oki 87 - Manual (Page 25)

Installation 13
Installation
Getting Started
To install your new MFP machine, follow the instructions from Unpacking
to Setting the Fax Identification. You must complete these steps for your
MFP machine to operate properly.
If you have purchased an option package for your MFP machine, refer to
the documentation you received with that option.
Where to Install Your MFP Machine
- Install your MFP machine in a dust-free location away from direct
sunlight.
- Allow several inches on each side of the MFP machine to ensure
adequate ventilation.
- Make sure that both power and telephone outlets are available
nearby.
- Choose a location where the relative humidity is between 20% and
80%, and where the temperature is between 10°C/50°F and 32°C/
92°F.
Unpacking
Before you begin, be sure that all the items listed below are included in
your package. Remove the contents from the carton and place them on a
sturdy surface.
- MFP unit
- Toner cartridge - Image drum unit (inside MFP unit)
- Power cord - Telephone line cord
- Paper tray/Copy stacker - Setup Guide & Warranty booklet
- Document Tray - Document Stacker
- Unimessage Software CD-ROM
Refer to the illustrations in the Component Identification section.