Oki 87 - Manual (Page 61)

Basic Operations 49
Power Failures and Memory
If power is interrupted to your MFP machine, the following problems
occur:
- Any messages your MFP machine has scanned into memory but
not yet transmitted are lost.
- Any messages your MFP machine has received into memory but
not yet printed are lost.
- If you have loaded documents on your MFP machine’s document
feeder, any dialing or transmission settings are lost.
Your MFP machine prints a power off report to inform you in the event of
a power failure. Use this report to determine which received messages
you may have lost, and to determine which transmissions you may have
to resend. See the Reports section for more information.
Making Copies
Your MFP machine can also be used to make copies. You can make up
to 50 copies at one time. Your MFP machine automatically makes all
copies in FINE mode.
1 Load your documents.
2 Press the COPY key. The display shows PRG. NO. OF COPIES,
[1SETS]. If you want to make just one copy, you are finished. Your
MFP machine waits a moment, then begins copying.
3 To make multiple copies, enter the number of copies you want to
make on the numeric keypad. Then press the COPY key again.
Your MFP machine begin making copies.
Tip: When the message PRG. NO OF COPIES is displayed, you
can change the degree of print resolution.