Oki 87 - Manual (Page 82)

70 OKIOFFICE 87 User’s Guide
22 NO TONER MEM RX: With this function turned on, your MFP
machine automatically receives and stores messages in its memory
when it is low on toner. When turned off, messages print even if toner
is low or empty. Available settings are on and off.
23 MEM FULL SAVE: With “Broadcast Transmission” and other
functions, “call origination” starts after an entire document is read into
memory. If during this process, memory becomes full and an “opera-
tor time out” seems likely, a message to that effect is shown in the
Display Panel if this MEM full save function is on. If it is off, data that
could not be read into memory is automatically deleted. Available
settings are on and off.
24 CONTINUOUS TONE: With this function on, you can choose
whether to have a warning tone sound when receiving a transmission.
Pressing the STOP key turns off the tone. Set this function to off for
no warning sound. Available settings are on and off.
25 INSTANT DIAL: Set this function to start reading documents upon
“call origination” when transmitting. Available settings are on and off.
Broadcast mode:
• Memory available: all the documents are read into the memory
before call origination.
• Memory full: reading is impossible.
25 Instant Dial = ON:
• Memory available: document reading starts upon call origination.
• Memory full—Feeder transmission: starts reading document when
receiving the CFR signal of the remote machines after call origi-
nation.
25 Instant Dial = OFF, 17 Mem./Feeder SW = MEMORY:
• Memory Available: call origination after all documents are read
into memory.
• Memory Full—Feeder transmission: starts reading document
when receiving the CFR signal of the remote machines after call
origination.