Oki 87 - Manual (Page 42)

30 OKIOFFICE 87 User’s Guide
d When the Install New Modem screen appears, select the
appropriate device and click Next.
e Check Selected ports, select the port displayed in Step 8, and
click Next.
f When Digital Signature Not Found appears, click Yes.
g Click Finish and when the Modems Properties dialog appears,
click OK.
13 When Install Complete screen appears, click OK and the setup of
the driver is now complete.
Windows Me/98/95
1 Make sure that both the printer and the computer are turned OFF.
2 Connect the fax machine and computer with a parallel interface
cable.
3 Turn the fax machine and computer ON and allow Windows to start.
If you see a prompt telling you that a new device has been detected,
press Cancel.
4 Insert the Unimessage Pro XL CD-ROM into your CD-ROM drive.
5 After the setup program has automatically started, click Setup
device driver and Unimessage Pro and follow the on-screen
instructions as appropriate. This installs both the printer driver and
the Unimessage Pro software.
Note: If you want to install only the driver, click Setup device driver.
Note: If the setup program does not automatically start or Auto insert
notification is turned off, click on Start
®
Run.... Type in
D:\SETUP.EXE (where D is the drive letter of your CD-ROM
drive) and click
OK.
6 When the Install Complete screen appears, click Finish. After the
computer restarts, setup of the driver is complete.