Oricom S6000 - Manual (Page 10)

Menu Short-cuts
Once the Menu key is pressed from standby, user can press the digit
that corresponds to the position of a main menu item to enter that
menu directly. User can press 1 for the SMS menu, 2 for the
FEATURES menu, 3 for the SOUNDS menu, 4 for the CALL SETTING
menu, 5 for the DISPLAY menu, 6 for the SYSTEM menu, and 7 for the
RESET menu.
• Once a digit is pressed, menu items of the corresponding menu will
be displayed and the first item will be selected (eg. MONITOR if 2
is pressed).
• Pressing a digit will be equivalent to scrolling to the particular menu
item and pressing OK.
• This shortcut will work whenever the user is in the level of the main
menu items (i.e. user can scroll through the items and still press a
digit to enter a menu).
Once inside a main menu, user can also press the digit that
corresponds to the position of a submenu item to enter that submenu
directly.
• Once a digit is pressed, menu items of the corresponding sub-
menu will be displayed and the first item will be selected (eg. ON if
1 is pressed inside the FEATURES menu and monitor is currently
ON).
• Pressing a digit will be equivalent to scrolling to the particular
submenu item and pressing OK.
• This short-cut will work whenever the user is in the level of the
submenu items (i.e. user can scroll through the items and still press
a digit to enter a submenu).
Basic Operations
During Standby
When the phone is not in use, the LCD displays:
i) the battery icon, and the Signal indicator;
ii) the handset name (Factory default Oricom can be changed),the
handset no.; and
iii) the clock
Making External Calls
Using Traditional Dialling
• Press and wait for dialling tone.
• The icon on handset will be on and then the
will also be
on.
• The LED on the handset and the In Use LED on the base unit
will also be turned on.
• Use the keypad to dial the phone number.
• If the number of digits entered exceeds the display space the
icon will be turned on.
• The call timer will display after a while and start timing the call.
To End a Call
• Press , or
• Place the handset on the base cradle.
• The duration of the call will remain for about 5 seconds after
you hang up.
10 of 42