Oricom S6000 - Manual (Page 33)

Base Ringer Melody for External Calls
• Press . Use to select SOUNDS.
• Press . Use to select BS RINGER.
• Press . Use to select MELODY.
• Press . Use to select the desire melody, MELODY 1 to
MELODY 10, for incoming external calls.
• Press to confirm the selection.
Alert Tones
User can choose to turn on or off the following tones according to their
preference.
Key Beep: Sound a tone whenever a key is pressed.
Confirmation: Sound a tone when a setting or choice is confirmed.
Charging:
Sound a tone when the handset is returned to the base
cradle for charging.
• Press . Use to select SOUNDS.
• Press . Use to select TONES.
• Press . Use to select from KEY BEEP, CONFIRMATION
and CHARGING.
• Press on a selection to select ON or OFF.
• Press to confirm.
Out of Range Warning
When the handset is too far away from the base during standby, the
display will show SEARCH BASE and the icon will blink.
• Bring the handset nearer to the base so that the signal gets
stronger.
• When the signal between the handset and base re-establishes, the
display will go to standby and the icon will be steady.
When the handset is too far away from the base during a call, user will
hear an alert tone through the earpiece.
• Bring the handset closer to the base so that the signal gets
stronger.
• If you fail to bring the handset back in range with the base, your
call may be disconnected.
Auto Answering
When the function is activated, user is able to answer a call by lifting
the handset out of the base cradle without having to press the
key.
• Press . Use to select CALL SETTING.
• Press . Use to select AUTO ANSWER.
• Press .
• To activate:
o Use to select ON. Press .
o User can answer a call by lifting the handset out of the base
cradle without having to press the key.
• To de-activate:
o Use to select OFF. Press .
33 of 42