Oricom S6000 - Manual (Page 30)

Editing Service Number
• Press during predial or standby.
• The display will read ADD ENTRY and the first entry of the
Service list.
• Use to scroll through the services or press a digit to
search like the phonebook entries.
• Press on a service. Use to select EDIT ENTRY.
• Press . NAME? and the name of the service will be
displayed.
• Edit the name and press to confirm.
• NUMBER? and the number of the entry will be displayed.
• Edit the number and press to confirm.
• Press to exit.
Note: If the edited service would have the same name as a
previously entered one, the display will read REPLACE?
together with the name of the service. Press will
replace the previous service with the new service.
Delete a Service
• Press during predial or standby.
• The display will read ADD ENTRY and the first entry of the
Services list.
• Use to scroll through the services or press a digit to
search like the phonebook entries.
• Press on a service. Use to select DELETE.
• Press . The display reads DELETE?.
• Press again to confirm and the selected service is
deleted.
• Press to exit.
Note: Refer to Delete All Records section to delete all the services
numbers at once.
Prefix Matching
User can program to automatically add a prefix to the number dialled if
the first few digits of the number match the ones described in the prefix
rules. User can add up to three rules each of which includes up to five
digits for both prefix and the starting digits of the number to match.
When the prefix rules are activated, the numbers for quick dial, direct
dial, predial, phonebook dial, call back from call log, and redial will be
checked if a prefix would be added to them.
If the number going to be dialled starts with the digits entered in the
prefix rules, the respective prefix will be appended before the number
and dialled out. For example, prefix for rule one is 123, and the number
for rule one is 589, when trying to dial out the number 5897648, it will
be dialled as 1235897648. The prefix will not be displayed or stored in
the redial log.
• Press . Use to select FEATURES.
• Press . Use to select PREFIX.
• Press . The display reads PIN?.
• Enter the correct PIN of the base. Press .
• Use to scroll through PREFIX 1 to PREFIX 3.
• Press on a selection.
30 of 42