Base selection, Making internal calls, To end a call – Oricom S6000 User Manual
Page 37
• Press on the handset. The handset will read SEARCH BASE
X while it searches for the base unit (where ‘X’ is the number of the
base you are registering to).
37 of 42
• Once a connection has been made, the handset name and number
will be shown on the display.
Base Selection
AUTO
If the base selection setting is set to auto, whenever the
handset loses link or is powered up, it will search any
available registered base to connect.
PREFER One of the bases registered can be assigned as a
preferred base so that it will be searched for certain period
when the handset loses link or is powered up. If that base
cannot be found, the handset will search for other
registered bases to connect.
FIXED
One of the bases registered can be assigned as a fixed
base so that it will be the only base to be searched when
the handset loses link or is powered up. If that base cannot
be found, the handset will not link up to any other base.
To set:
• Press . Use
to select SYSTEM.
• Press . Use
to select SELECT BASE.
• To select AUTO,
o
Press
. Use
to select AUTO.
o
Press
to confirm. The handset will search any available
registered base.
• To select PREFER,
o
Press
. Use
to select PREFER.
o
Press
. The display reads BS 1 2 3 4.
Use the numeric key
o
s to enter the base number to be set as
rr
o
the prefe ed base.
Press
to confirm. The handset will search the selected
• To select Fixed base,
base.
o
Press
. Use
to select FIXED.
o
Press
. The display reads BS 1 2 3 4.
Use the numeric
o
keys to enter the base number to be set as
o
the fixed base.
Press
to confirm. The handset will search the selected
n setting will change to auto when the handset is
egistered to a base.
ature requires more than one handset registered to the same
base.
base.
Note: Base selectio
r
Making Internal Calls
This fe
• During
standby,
press
.
• The icon on handset will be turned on.
• Press the registered handset number you wish to call.
The other handset will ring.
•
Answer the call from that handset and
wo handsets can now talk.
To end a call
t
• Press
, or
• Place the handset back on the base unit.