Oricom S6000 - Manual (Page 36)

Delete All Records
User can delete the records of the private phonebook, shared
phonebook, call log, redial list, services number
and SMS messages by
resetting the respective menu.
• Press . Use to select RESET.
• Press . Use to select from PRIV PBOOK, SHARED
PBOOK, CALL LOG, REDIAL LIST, SERVICES or SMS
MESSAGES .
• Press . The display will show RESET?.
• Press to confirm.
Note: If PRIV PBOOK is reset, the quick dial feature of all quick dial
keys will be automatically off.
If SERVICE is reset, factory pre-programmed services, if any, will
be restored.
If SMS MESSAGES is reset, all SMS messages, if any, will be
deleted.
Reset Factory Default
All settings for both the handset and base can be restored to the
factory defaults by this menu.
• Press . Use to select RESET.
• Press . Use to select SETTINGS. Press .
• The display reads PIN?. Enter the correct PIN of the connected
base. Press .
• All settings will be restored to the factory defaults.
Note: Factory default settings can’t be restored on the base or on the
handset alone. Also, if you want to restore factory settings on
other handset currently connected to the same base, you will
need to restore factory setting on that handset.
Using Additional Handsets
Registration
Each additional S6050 handset purchased separately must go through
the registration process with the base. Each handset can be registered
to up to 4 base units and each base can be registered to up to 5
handsets.
When registering, each handset can select base number for the base
to be registered so that it can be identified at base selection setting.
To register:
• Press . Use to select SYSTEM.
• Press . Use to select REGISTER.
• Press . The display will read BS 1 2 3 4. If the handset has
been registered to a base, the number of the registered base will
be flashing.
• Enter the number of the base unit you wish to register using the
numeric key. The entered base number will be displayed on the
second line.
• Press . The handset will read PIN?.
• Enter the PIN number of the base to be registered (maximum 8
digits, the default PIN is 0000).
36 of 42
• Press and hold the PAGE button on the base unit until you hear
2 beeps.