Omega Vehicle Security LVP-51 Series - Manual (Page 9)

9
ELECTRICAL (continued) Step Five
Signal Output (Relay switching): Allows the sensor to switch a small load on or off directly, using an internal
1A relay (60 VAC/60 VDC). All models, LVP‐51‐R uses the relay and features 4 wires (red, black, white and
green) and a shield wire. The NO/NC status is set by the polarity o–f the voltage feeding the red and black
wires. The green wire is the common for the relay and the white wire is the NO or NC, depending on the
polarity of red and black.
Normally Open Wiring:
Normally Closed Wiring: