Oricom PIX2000 - Manual (Page 16)

14
Operation and setup of the cordless handset
Auto Answer
If you set the “AUTO TALK” to on you just need to pick up the cordless
handset from the charger to answer the call directly, needn’t press or
key.
Handset Speakerphone
Press key to activate or deactivate the handset speaker.
Dialling from the Phone Book
Press button when in standby mode, the fi rst entry in the phone book
appears.
Note:
If there is no record in the phone book, “PB EMPTY” will display.
1. Press or key to select the required record from the phone
book.
2. Press or key to dial the number.
3. After finishing the conversation, press key or place the cordless
handset into the charger to terminate the call.
Intercom
You can make an intercom any two handsets (if you have more than one
handset).
1. When the handset is in standby mode, press and hold INT key, “INT-
NUMBER?” will be shown, input the called handset number.
2. The called handset will ring and the LCD will show the calling
handset’s name and number.
3. Press or key in the called handset to answer.
Call Transfer
The function allows you to transfer an external call from a handset to
another handset.
PIX2000 User Guide.indd 章节2:14 PIX2000 User Guide.indd 章节2:14 2009-6-30 17:33:32 2009-6-30 17:33:32