Oricom PIX2000 - Manual (Page 53)

51
Operation and setup of the picture frame
Registration
Step1: Select [Registration] icon using the navigator key and press on
the photo frame or on the remote control to proceed.
Step2: Select digits using the navigator key and press on the photo
frame or on the remote control to input PIN.
Note:
The default PIN is “0000” and the PIN code must be 4 digits.
Step3: Press and hold the key on the base for about 15 seconds.
Step4: Select [Save] icon using the navigator key and press on the
photo frame or on the remote control to proceed, the LCD screen
will show “Searching…”
If the Photo Frame registration succeeds, the LCD screen will show “OK”.
Ringer Pattern
Step1: Select [Ringer Pattern] icon using the navigator key and press
on the photo frame or on the remote control to proceed.
Step2: Select desired ring pattern using the navigator key and press
on the photo frame or on the remote control to confi rm.
PIX2000 User Guide.indd 章节2:51 PIX2000 User Guide.indd 章节2:51 2009-6-30 17:33:38 2009-6-30 17:33:38