Oricom PIX2000 - Manual (Page 31)

29
1. Press key.
2. Press or key to select “SETUP BS” and press key.
3. Press or key to select “VMWI” and press key. “VMWI
OFF?” will display.
4. Press key to confi rm the setting.
Reset Base
This option allows you to restore the base and Date/Time to the default
setting.
1. Press key.
2. Press or key to select “SETUP BS” and press key.
3. Press or key to select “RESET” and press key, the LCD
will display “ENTER PIN”.
4. Input the correct PIN code using the number key, press key to confi rm,
and the LCD will display “RESET?”
5. Press key to confi rm the setting.
Date / Time
You can set the Date/Time displayed in standby mode.
1. Press key.
2. Press or key to select “DATE/TIME” and press key.
3. Input the correct last two digits of year (range: 00-99) using number
key, press key to confi rm the setting and enter month and date
setting.
4. Input the correct month and date, the format is: date / month (date
range: 01-30/31, month range: 01-12), press key to confirm the
setting and enter time setting.
5. Input the correct time, the format is: hour/minute (hour range: 00-23,
minute range: 00-59).
6. Press key to confi rm the setting.
Menu Operation
PIX2000 User Guide.indd 章节2:29 PIX2000 User Guide.indd 章节2:29 2009-6-30 17:33:34 2009-6-30 17:33:34