Connecting antenna – Onkyo TX-L55 User Manual

Page 18

Advertising
background image

18

Connecting Antenna

This chapter explains how to connect the supplied indoor
FM antenna and how to connect commercially available
outdoor FM antenna.
The TX-L55 won’t pick up any radio signals without any
antenna connected, so you must connect the antenna to
use the tuner.

Connecting the Indoor FM Antenna

The supplied indoor FM antenna is for indoor use only.

If you cannot achieve good reception with the supplied
indoor FM antenna, try a commercially available out-
door FM antenna instead (see page 18).

Connecting an Outdoor FM Antenna

If you cannot achieve good reception with the supplied
indoor FM antenna, try a commercially available out-
door FM antenna instead.

Notes:

• Outdoor FM antennas work best outside, but usable

results can sometimes be obtained when installed in an
attic or loft.

• For best results, install the outdoor FM antenna well

away from tall buildings, preferably with a clear line
of sight to the transmitter.

• Outdoor antenna should be located away from pos-

sible noise sources, such as neon signs, busy roads,
etc.

• For safety reasons, outdoor antenna should be situated

well away from power lines and other high-voltage
equipment.

• Outdoor antenna must be grounded in accordance

with local regulations to prevent electrical shock
hazards.

Connecting Antenna

1

Attach the FM antenna, as shown.

American Model

Other Models

Once the TX-L55 is ready for use, you’ll need to
tune into an FM radio station and adjust the posi-
tion of the FM antenna to achieve the best possi-
ble reception.

2

Use thumbtacks or something similar to
fix the FM antenna into position.

Caution:

Be careful that you don’t injure yourself

when using thumbtacks.

FM antenna socket

FM

75

Insert the plug fully
into the socket.

FM

75

Insert the plug fully
into the socket.

Thumbtacks, etc.

Advertising