Advanced operation —continued – Onkyo TX-L55 User Manual

Page 45

Advertising
background image

45

Advanced Operation

—Continued

The DVD multichannel input is for connecting a compo-
nent with individual 5.1-channel analog audio outputs,
such as a DVD player or MPEG decoder.
See “DVD Multichannel Connection” on page 24 for
hookup details.
This section explains how to select the DVD multi-
channel input for playback.

Notes:

• When the DVD multichannel input (Multi) is selected,

the Multichannel Direct (MLT Direct) listening mode
is selected.

• While the DVD multichannel input is selected, the

Speaker Configuration settings on page 48 are
ignored, and signals from the multichannel input are
fed to the front left, front right, center, surround left,
and surround right speakers and subwoofer regardless
of those settings.

Adjusting the Volume of Individual

Speakers for the Multichannel Input

While using the multichannel input, you can adjust the
volume of individual speakers.

Note:

• You cannot select speakers that are set to No or Non

on the Speaker Configuration menu (see page 48).

• These settings are not the same as those in “Speaker

Level Calibration (Test Tone)” on page 30.

• These settings affect only the DVD multichannel input

and have no effect on the other inputs.

Using the DVD Multichannel Input

1

Press the INPUT SELECTOR
[DVD] button.

The input source changes to DVD.

2

Press the REMOTE MODE [AMP]
button followed by the [SETUP]
button.

The DVD multichannel input needs to
be selected in the setup menus.

3

Use the Up and Down [

]/[

]

buttons to select “4. Input Set,”
and then press [ENTER].

4

Use the Up and Down [

]/[

]

buttons to select “Audio,” and
then use the Left and Right [

]/

[

] buttons to select “Multi.”

5

Press the [SETUP] button.

The setup menu closes.

6

Start playback on your DVD
player.

DVD

AMP

TUNER

ENTER

ENTER

ENTER

1

Press the REMOTE MODE [AMP]
button, and then use the [CH
SEL] button to select each
speaker.

Speakers are selected in the following
order.

2

Use the [LEVEL–] and [LEVEL+]
buttons to adjust the volume.

The volume can be adjusted from –12
to +12 (–30 to +12 for the subwoofer).

AMP

TUNER

CH SEL

Front left

Center

Front right

Surr right

Surr left

Subwoofer

LEVEL LEVEL

+

-

Advertising