Onkyo TX-L55 - Manual (Page 8)

8
Front & Rear Panels
For detailed information, refer to the pages in
parenthesis.
A STANDBY/ON button (29)
This button is used to set the TX-L55 to On or
Standby.
B STANDBY indicator (29)
This indicator lights up when the TX-L55 is in
Standby mode, and it flashes while a signal is being
received from the remote controller.
C DISPLAY button (46)
This button is used to display various information
about the currently selected source.
D Remote control sensor (7)
This sensor receives control signals from the remote
controller.
E Display
See “Display” on page 9 for more information.
F LISTENING button (39)
This button is used to select the listening modes. It’s
illuminated while the TX-L55 is on.
G INPUT [ ]/[ ] buttons (33, 47)
These buttons are used to select the input source.
They’re illuminated while the TX-L55 is on.
H MASTER VOLUME control (33)
This control is used to set the volume of the
TX-L55.
I PHONES jack (35)
This 1/4-inch phone jack is for connecting a stan-
dard pair of stereo headphones for private listening.
J TUNING [ ]/[ ] buttons (36)
These buttons are used to tune the radio.
K TONE, [–] & [+] buttons (52)
These buttons are used to adjust the bass and treble.
Front Panel
B 1 C 5 4 6 8 7
9 J K
TX-L55