Onkyo TX-L55 - Manual (Page 49)

49
Advanced Setup —Continued
Notes:
• When the SP Detect function is used (page 30), these
Speaker Configuration settings will change.
Crossover Frequency
To get the best bass performance from your speaker
system, you need to set the crossover frequency
according to the size and frequency response of your
subwoofer and other speakers (front, center, and sur-
round).
Note:
• For a more accurate setting, look up the frequency
response in the manuals supplied with your speakers
and set accordingly. In addition, listen to some music
that you know well and choose a higher crossover fre-
quency if you think there’s not enough sound coming
from the subwoofer; a lower setting if you think
there’s too much.
7 Use the Down [ ] button to
select “Surr B,” and use the Left
and Right [
]/[ ] buttons to
select:
Sml: Select if the surround back
speaker is small.
Lrg: Select if the surround back
speaker is large.
Non: Select if no surround back
speaker is connected.
Notes:
• If the Surround setting in step 6 is set
to Non, this setting does not appear.
• If the Surround setting in step 6 is set
to Sml, the Lrg option cannot be
selected.
8 Press the [SETUP] button.
The setup menu closes.
1 Press the REMOTE MODE [AMP]
button followed by the [SETUP]
button.
2 Use the Up and Down [ ]/[ ]
buttons to select “1. SP Config,”
and then press [ENTER].
ENTER
ENTER
AMP
TUNER
ENTER
ENTER
3 Use the Down [ ] button to
select “Xover,” and then use the
Left and Right [
]/[ ] buttons to
select a crossover frequency.
Choose a crossover frequency suitable
for your speaker system.
If you’re using a subwoofer, choose a
crossover frequency based on the diam-
eter of your front speakers.
If you’re not using a subwoofer, use
the diameter of the first speaker that
you specified as Sml in steps 4 through
7 in the “Speaker configuration” set-
tings.
4 Press the [SETUP] button.
The setup menu closes.
ENTER
ENTER
Speaker cone
diameter
Crossover
frequency
Over 8 in.
(20 cm)
60Hz
6-1/2 to 8 in.
(16–20 cm)
80Hz
5-1/4 to 6-1/2 in.
(13–16 cm)
100Hz (default)
3-1/2 to 5-1/4 in.
(9–13 cm)
120Hz
Under 3-1/2 in.
(9 cm)
150Hz