Onkyo DX-R700 - Manual (Page 19)

19
Name function
■ Entering a disc name or artist name (see
page 28)
You can enter one disc name and one artist name
per disc.
■ Entering track names (see page 31)
You can enter up to 99 track names per disc.
■ Erasing the disc name, artist name, and
track names (see page 32)
You can erase all the name information retained in
the DX-R700.
Finalization
The finalization process writes the TOC data (tracks,
etc.) for the disc in a special area on the disc called
the PMA. After finalization, CD-Rs can be played in
CD players. Even after finalization, CD-RWs can only
be played on CD players that are compatible with
CD-RWs.
For CD-Rs that have been finalized, you cannot add
more recordings.
Erasing recording (CD-RW discs only)
The data recorded on CD-RW discs can be erased
and the disc can be used again as many times as
desired (see page 34).
The erasing methods are given below.
• Erasing data on unfinalized CD-RWs
Last track erase: Erases only the last track.
Multi-track erase: Erases all tracks from the
selected track to the final track.
All track erase: Erases all tracks.
• Erasing data on finalized CD-RWs
All track erase: Erases all tracks.
TOC erase: Returns a finalized disc to the
unfinalized conditions.
• Erasing discs
Erases all data recorded on the CD-RW.
Recording modes
About the level sync function
The level sync function detects the space between
tracks (songs, etc.) in the recording source and
automatically assigns track numbers to them during
recording.
■ When the level sync function is turned on
The track numbers are updated automatically. Press
the o REC button to set track numbers manually .
■ When the level sync function is turned off
The track numbers are not updated automatically.
Press the o REC button to set track numbers
manually .
■ For analog recording
The level sync function automatically turns On.
If there are gaps of no sound 2 seconds or longer
between tracks in the recording source, the track
numbers will be automatically updated.
■ For digital recording
The level sync recording automatically turns on. If
the digital signal includes the track number
information, the track numbers will be automatically
assigned.
For satellite broadcasts and other digital signals that
do not include track number information, the track
numbers will be automatically updated when 2
seconds or more of silence is detected.