Onkyo DX-R700 - Manual (Page 34)

34
Erasing recordings
(CD-RW discs only)
The data recorded on CD-RW discs can be erased
and the disc can be used again as many times as
desired. The erasing methods are given below.
■ Erasing data on unfinalized CD-RWs
Last track erase: Erases only the last track.
Multi-track erase: Erases all tracks from the selected
track to the final track.
All track erase: Erases all tracks.
■ Erasing data on finalized CD-RWs
All track erase: Erases all tracks.
TOC erase: Returns a finalized disc to the unfinalized
condition.
■ Erasing discs
Erases all data recorded on the CD-RW.
Notes:
• If “Disc Error” appears during an erase, abort
the erase and check the disc for scratches, dirt,
or dust. After removing any dirt or dust that may
exist, resume the erase.
• After performing an erase, always remove the
disc before turning off the power. If the disc is
left inside when the power is turned off, there is
a chance the erase may be left uncompleted.
Erasing data on non-finalized CD-RWs
Insert the CD-RW you wish to erase and place the
DX-R700 in the stop state.
■ Erasing all tracks
This operation will erase all recorded tracks and
entered names (the disc name, artist name, and/or
track titles) in the CD-RW disc.
DUAL DIGITAL INPUT
ANDBY ST
OFF ON
STANDBY/ON
POWER
AUDIO CD RECORDER DX-R 700
MEMORY CLEAR
REPEAT FINALIZE
STOP PLAY PAUSE
REC
PHONES LEVEL
MIN MAX
PHONES
YES
INPUT DISPLAY
EDIT/ NO
PUSH TO ENTER
MULTI JOG
q MULTI JOG w
YES EDIT/NO
2
Press the MULTI JOG dial.
Pressing the YES button provides the same
operation.
“All Erase??” appears.
3
Press the MULTI JOG dial.
Pressing the YES button provides the same
operation.
Erasing begins. When completed, “Complete”
appears in the display and the DX-R700 will
stop.
PUSH TO ENTER
MULTI JOG
PUSH TO ENTER
MULTI JOG
EDIT/ NO
PUSH TO ENTER
MULTI JOG
1
Press the EDIT/NO button and turn the
MULTI JOG dial until “All Erase?”
appears.