Olivetti 490 - Manual (Page 17)

11
• Unloads a document from the ADF.
• Turns off the " " LED indicator.
• Returns the fax machine to the stand-by
mode.
• Stops the programming, transmission, re-
ception or copying operation in progress.
• Starts receiving a document.
• After the fax number has been di-
alled, starts sending a document (only
with the document already inserted
in the ADF).
• Confirms the selection of menus,
submenus, parameters and their val-
ues and moves on to the next condi-
tion.
• Starts copying a document (only with
the document already inserted in the
ADF).
• Used to dial a telephone or fax number without
lifting the telephone handset.
• Also activates the handsfree function.
• Displays a list of the last 10 fax
or telephone numbers dialled
(outgoing calls) or the last 20
numbers from which calls have
been received (incoming
calls), irrespective of whether
or not a document was present
in the ADF.
• Scroll "backwards" through the
values of a parameter.
• Move the cursor to the "left" while
entering numbers and names.
• Scroll "forwards" through the values of a parameter.
• Move the cursor to the "right" while entering numbers and
names.
With the fax machine connected to a private exchange:
- Before dialling the telephone or fax number, it provides
access to the public line. When pressed twice, it provides
access to the programmed network manager.
Display
A two-line liquid crystal display
with a capacity of 16 characters
per line.
Shows operator prompts and er-
ror messages. • Dial the fax or telephone number.
• Set any numeric data.
• Select digits and alphanumeric characters during the entry of
numbers and names.