Olivetti 490 - Manual (Page 29)

23
T
O MAKE A COPY
W
HAT DOCUMENTS CAN BE COPIED
Before making a copy, make sure that the document respects the
characteristics described in "What documents may be used",
section "To send a document", chapter "Basic transmission and
reception operations".
T
O MAKE A COPY
As mentioned previously, you can also use the fax machine
as a photocopier. The printing quality obtained depends
on the type of copy you want to obtain "Normal copy" or
"Quality copy" and the contrast and resolution values
that you select before starting the copying function.
Choose the type of contrast on the basis of the following
criteria:
• NORMAL, if the document is neither too light or too
dark.
• LIGHT, if the document is too dark.
• DARK, if the document is too light.
Choose the type of resolution on the basis of the following
criteria:
• TEXT, if the document contains easily legible text or sim-
ple graphics.
• PHOTO, if the document contains shaded areas.
Insert the document in the ADF. The display shows on the
top line:
DOCUMENT READY
and on the bottom line, the default contrast value: NOR-
MAL.
The display shows the default copy size, contrast and reso-
lution settings: 100%, NORMAL and TEXT, respectively.
The display shows:
COPY: HIGH QUAL.
|
/
}
To view the other available option: "COPY: NORMAL".
To confirm your choice. The display shows:
ZOOM: 100%
|
/
}
To choose the desired copy size setting: "140%", "70%" or
"50%".
To confirm your choice. The display shows:
CONTRAST: NORMAL
|
/
}
To display the other two types of contrast available: "CON-
TRAST: LIGHT" or "CONTRAST: DARK".
To confirm your choice. The display shows the values that
you have just selected. At this point, simply choose the reso-
lution you want and set the number of copies you want to
make:
To choose the desired resolution setting: "TEXT" or
"PHOTO".
Press the key if you want to make one copy only,
otherwise, enter the desired number of copies (max. 9)
before pressing the key. The fax machine saves
the pages of the document one by one, before making the
copies.
notE
If you want to abort the copy in progress, press the
key twice: the first time to unload the document from the ADF
and the second time to return the fax machine to the initial
stand-by mode.
If the document to be removed is made up of more than one
sheet, before pressing to unload the first, open the
operator console and remove all the other sheets by hand.