Olivetti 490 User Manual
Page 31
25
T
O
DISPLAY
THE
CALLER
ID
This function, which may be activated by the telephone
company on request by the user,
is only available in
some countries and conforms to the ETSI ETS 300
778-1 standard.
This function
tells you immediately who is calling. In
this way, you will be able to decide whether to answer the
call or not.
When this function is enabled, if the fax machine is in
stand-
by mode, whenever a call is received, it always shows
one of the following items of information:
•
number or name of the correspondent who called
you;
•
PRIVATE: if the correspondent has chosen not to reveal
his identity to you;
•
NOT AVAILABLE: if the correspondent is connected to a
telephone exchange that does not support this service.
If you are
programming your fax machine and, when an
incoming call is received, want to
know who is calling
you, you must press the
key before answering
the call.
It may however happen, if you are connected to a particu-
lar kind of telephone network, that the number of the caller is
not displayed on the fax machine. If this happens, call your
local customer engineering service centre.
The fax machine is already set up to display the caller
ID. You may however set it up not to display it, as follows:
Until the display shows:
INSTALLATION
The display shows:
TEL. LINE SETU-UP
The display shows:
ENHANCED FEATUR.
Until the display shows:
CALLER ID: ON
|
/
}
To view the other available option: "CALLER ID: OFF".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
NOTE
With this function enabled, if a power failure occurs and the
date and time are lost, they will be restored when the next call
is received.
T
O
CHANGE
THE
NUMBER
OF
RINGS
This function is only enabled in some countries.
If set in "
PHONE/FAX" or "TAD/FAX" reception mode, when
an incoming call is received, the fax machine automatically
recognizes, after
two rings, whether the call is being made
from another fax machine (
FAX) or a telephone (TEL).
If you want, you can change the number of rings, as fol-
lows:
Until the display shows:
INSTALLATION
Until the display shows:
RING COUNT:02
|
/
}
To view the other available values: "01", "04", "06", "07"
and "08". For example: "04".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
T
O
CHANGE
THE
RING
VOLUME
Until the display shows:
FAX SET-UP
The display shows:
DATE AND TIME
The display shows:
VARIOUS SETTINGS
Until the display shows:
RING VOLUME:HIGH
|
/
}
To view the other available options: "RING VOLUME:LOW",
"RING VOLUME: MED" and "RING VOLUME:OFF". For
example: "RING VOLUME: MED".
To confirm your choice.
To return the fax machine to the initial stand-by mode.