Problems printing from windows, Cannot configure for parallel connection – Oki 3037 User Manual
Page 435
ES 3037/3037e Windows Troubleshooting • 435
PROBLEMS PRINTING FROM WINDOWS
Cannot configure for parallel connection.
Possible cause
Remedy
The computer does not
support bi-directional
parallel interface.
There is no fix for this problem. You should only use a
computer that does support a bi-directional parallel
interface.
Parallel cable does not
meet specifications.
Use a bi-directional parallel cable to IEEE 1284–1994
standard.
The interface is disabled.
Check that the parallel interface is set to enable.
Configuration procedure
was not correctly followed
or cancelled.
Configure again from the beginning.
Parallel cable is
disconnected or faulty.
Reconnect or try another cable.
A converter, buffer or
extension cable is being
used.
Test by connecting printer and computer directly.