Oki 3037 - Manual (Page 498)

ES 3037/3037e Software Utilities • 498
Step 2: Create a New Project
1. Open Storage Device Manager.
2. Click Projects
→
New Project .
The Project dialog box opens.
3. Click Projects
→
Save Project , enter the path/name for
storing the project on your hard drive or your network, then
click
Save .
Step 3: Add Files to the Project
1. Click Projects
→
Add File to Project .
The Open dialog box appears.
2. Make sure PRN files (*.prn) is selected in the Files of type
drop-down list.
3. Browse to the folder where the files are saved and select the
files you wish to add to the project, then click Open .
The Information dialog box appears.
4. Click OK .
The files are saved as HST.
5. Repeat steps 1 through 4 until you have added all the files you
wish to add to the Project.
NOTE
To delete a file from the project, click the file name, then
click Projects
→
Remove File from Project.