TAG Player System - Manual (Page 10)

TO WEAR THE HUD (HEADS UP DISPLAY)
HEADSET SYSTEM
1. Wake up the TAGGER by pressing the TRIGGER.
2. Put the HUD (HEADS UP DISPLAY) HEADSET on over your head,
similar to putting on a pair of sunglasses. Take the right side of
the headband, and stretch it across the back of you head, and
loop it through the holder on the left side. Pull the headband
tight to the back of your head and fasten by pressing down
firmly. Adjust the strap on the back of your head so that the
headset is firmly in place. Make sure the HUD (HEADS UP
DISPLAY) OPTICAL PROJECTOR is on your right side, and that you
can see clearly through the lenses.
3. Move the OPTICAL PROJECTOR to position the EYEPIECE so that
you can clearly see your Visual Confirmation Symbols.
4. Adjust the brightness of the Visual Confirmation Symbols using
the DISPLAY BRIGHTNESS SLIDE SWITCH.
NOTE: The TAGGER will function properly without the HUD (HEADS
UP DISPLAY) attached.
LAZER TAG Players follow a strict code of conduct when playing
LAZER TAG. The following is the Official LAZER TAG Code Of
Conduct that should be strictly adhered to in every game of
LAZER TAG.
Rule 1: LAZER TAG is a non-contact sport
This means no physical contact between you and other
players – EVER!
Rule 2: No covering the Receiver Dome
This means do not use anything to cover up the Receiver Dome
thereby preventing you from receiving tags. If you want to avoid
being tagged, you must use your defensive shields or take cover
behind something.
Rule 3: Equipment Failure means Disqualification
In the event that your TAGGER fails to work, you are disqualified
and must wait until the end of the game to join the next one.
Please check your TAGGER and HUD (HEADS UP DISPLAY)
carefully before entering a game to ensure that it is working
properly.
Rule 4:
LAZER TAG is a Game
Players must remember that LAZER TAG is only a game. It is
designed purely for recreational use and for fun. Not having fun
is against the code.
LAZER TAG® CODE OF CONDUCT
8